![\"\"](\"https:\/\/d9lhxyivbnow1.cloudfront.net\/wp-content\/uploads\/2017\/02\/23074857\/Mills-are-growing-to-increase-throughput-levels-1024x768.jpg\")
<\/p>\nAs operators seek to optimise income from mining, operational excellence and the ability to find new productivity gains are key focus areas.<\/p>\n
Tactics to achieve this include a re-evaluation of a mine\u2019s maintenance and procurement approach. The two are entwined because a tendency to exhaust equipment and\/or rely on tried, tested and sometimes under-performing components can lead to more frequent downtime.<\/p>\n
Whether it\u2019s a planned service or an emergency shutdown, any interruption to operations can have costly consequences.<\/p>\n
An example where this approach is being put into practice is in milling technology for mineral processing, where new equipment and processes are being introduced to optimise production efficiency. This includes reducing the number of production lines in action at any one time, so increasing mill sizes to enable the same, if not greater, throughput levels.<\/p>\n
One of the key advantages to this approach is that scheduled and unscheduled downtime is reduced. However, the activity levels of each mill must be closely managed to ensure that productivity remains high.<\/p>\n
Similarly, components used within the mill must guarantee optimum performance and reliability, so that unexpected maintenance or replacement is minimised.<\/p>\n
According to Trelleborg engineered products technical manager Zane Thomas, mill liner design and material selection is important to ensure the optimum flow of minerals and longer lasting performance of the lining.<\/p>\n
\u201cLiners play an important role in protecting the interior mill shell from impact and wear, while transferring energy to optimise grinding efficiency. These conflicting requirements mean that the lining must be carefully designed to ensure optimum, long lasting performance and reduced load stress on the mill,\u201d Thomas said.<\/p>\n
\u201cA key consideration is the material used to make the lining and lifter bars. For some materials, such as composite steel linings, the wear life can be unpredictable due to the quality of the steel, bonding techniques and the cracking of inserts.<\/p>\n
\u201cThis can become a safety hazard requiring frequent maintenance and replacement, not to mention the additional load in the mill. The result is a loss in efficiency and throughput, increase in power draw and downtime losses, all affecting the dollar per tonne recovery.\u201d<\/p>\n
<\/p>\n
\u00a0The benefits of rubber compound versus composite steel linings<\/strong><\/p>\n Used in most secondary, tertiary and a number of primary milling applications, rubber mill linings are almost half the weight of composite steel liners and come with huge advantages, such as the elimination of cracking or falling of inserts during mineral impact, as well as reduced noise levels during milling.<\/p>\n Rubber mill linings are easily monitored and wear life is predictable. Some components can also be designed with wear indicators incorporated, making it easier to identify when the lining needs to be replaced and therefore, when to schedule appropriate maintenance.<\/p>\n As the pressure to reduce unplanned downtime builds, in order to improve efficiency and mill productivity, the ability to measure liner wear becomes invaluable.<\/p>\n An all-rubber lining has been developed for composite lifter bar solutions. For example, Trelleborg recently developed and supplied a cost-effective, long-lasting rubber lifter bar solution for a ball mill in Australia.<\/p>\n The success with the 1605AM rubber compound and design has given Trelleborg the opportunity to offer its clients an alternative to composite steel lifter bars.<\/p>\n \u201cComposite lifters can not only add to the load in the mill, but are also difficult to handle in confined spaces and take much longer to install, adding to downtime and installation costs,\u201d Thomas said.<\/p>\n \u201cThe lifter bars made with new 1605AM rubber compound come with added benefits such as easy handling, quick installation time, reduced power draw and noise pollution. The reduction in overall weight decreases the impact on rotating components.\u201d<\/p>\n Downtime is a significant issue faced by the mining industry, and the mining and material processing industry is always looking for ways to enhance availability of the mills that grind and blend materials, Thomas added.<\/p>\n \u201cTrelleborg\u2019s rubber lifter bars offer increased operational efficiencies, significantly reduced downtime, simple wear monitoring and life predictability. In addition, when compared with steel, a rubber solution also provides superior resistance to the severe impact, high temperature and abrasion caused by the comminution of the ore within the mine\u2019s grinding mill, enhancing the life of the mill,\u201d he said.<\/p>\n Trelleborg offers a wide range of rubber lifter bars and plates for ball mills, rod mills and drum scrubbers. The standard rubber lifter sizes from Trelleborg range from 50mm to 250mm wide and 50mm to 350mm in height.<\/p>\n They come with aluminium and steel tracks, with different face angles to suit the milling or scrubbing application. A wide range of shell plates, grate plates, head plates and filler segments, including the backing rubber to protect the mother plate of the mill are also available.<\/p>\n