{"id":8920,"date":"2025-02-24T21:26:24","date_gmt":"2025-02-24T10:26:24","guid":{"rendered":"https:\/\/yinghuiinternational.com\/?p=8920"},"modified":"2025-02-24T21:26:25","modified_gmt":"2025-02-24T10:26:25","slug":"pumppoweraus-pemo","status":"publish","type":"post","link":"https:\/\/yinghuiinternational.com\/index.php\/2025\/02\/24\/pumppoweraus-pemo\/","title":{"rendered":"PumpPowerAUS\/PEMO"},"content":{"rendered":"\n

Horizontal slurry pumps are indispensable in moving abrasive and corrosive liquids efficiently. These pumps are designed to handle liquids containing solid particles, making them the right choice in various industries such as mining, construction, and wastewater treatment. Here below you\u2019ll find all the Pemo horizontal slurry pumps, while in the news section<\/a> we go deeper into the definition, types, uses, and advantages of horizontal slurry pumps.<\/p>\n\n\n\n

Pemo horizontal slurry pumps<\/h2>\n\n\n\n

Pemo\u2019s horizontal slurry pumps are specifically designed for specific industry and purpose, we can build it in the V-Belt and Direct Transmission versions. All the Pemo horizontal pumps have the sealing system that consists of mechanical seals<\/strong>, with faces that are made of Tungsten Carbide (widia) or of Silicium Carbide. Lubrication of the mechanical seals, when there is a pair per pump, can be made with flushing water at a determined pressure, depending on the version, or with water\/glicole by means of different closed circuits with natural or forced circulation. Instead, lubrication of the bearings is made with grease or oil.<\/p>\n\n\n\n

Pemo Pumps models<\/h2>\n\n\n\n

Pemo Pumps has three different series of horizontal sludge pumps:<\/p>\n\n\n\n

AO-AO\/AD Series are standard horizontal pumps with frontal inlet<\/strong>. Based on our standards, the maximum available pressure should never exceed 2 bar<\/strong> (29 psi). Since there is only one
mechanical seals<\/strong> these models are used to pump only water like fluids with almost no abrasive particles.<\/p>\n\n\n\n

AO\/TD \u2013 AO\/TD\/AD Series are horizontal pumps with frontal inlet and double mechanical seals<\/strong>, flushing must be done at a pressure that must be about 1 bar (15 psi) higher than the slurry outlet pressure. They can be used to pump abrasive and\/or acid liquids. Maximum outlet pressure should not exceed 3-4 bar<\/strong> (45 \u2013 60 PSI). Designed for heavy duty slurry and\/or acid applications, these pumps have capacities from 1 to 1500 m3\/h (5 to 6613 gpm).<\/p>\n\n\n\n

AO\/AB \u2013 AO\/AB\/AD Series are one of the most popular and distinctive products of the Pemo Pumps range<\/strong>. Thanks to the side inlet, the maximum pressure that the mechanical seals see is the fluid inlet pressure, greatly increasing life expectancy. For this reason, flushing must be done at a pressure that must be about 1 bar (15 psi) higher than the slurry inlet pressure instead. When pumping acid liquids, the shaft and the mechanical seals chamber can be made of special alloys.<\/p>\n\n\n\n

Designed for slurries and\/or acid applications, these Pemo pumps are truly unique! Maximum particle size is 2 mm though this is dependent on the specific application, capacities are from 1 to 900 m3\/h (5 to 3,968 gpm), and maximum discharge head is 90 m (295 ft) in the Hardalloy PEMO design.<\/p>\n\n\n\n

Primary markets<\/h2>\n\n\n\n

These are the primary markets where Pemo horizontal slurry pumps are used, we also can provide to our clients references and case studies.<\/p>\n\n\n\n

Mining, Quarries, and Mineral Extraction
Aggregate Industry
Chemical Industry
Food Industry
Industrial Wastewater Treatment.<\/p>\n\n\n\n

AO\/TI and AO\/TD Series, main characteristics<\/h2>\n\n\n\n