ThyssenKrupp merges Polysius and KH Mineral assets in France

246-720x375The industrial and technology group ThyssenKrupp is strengthening its plant technology capabilities in France by merging the formerly separate entities Polysius and KH Mineral to become ThyssenKrupp Industrial Solutions (France). The step comes into effect as of October 1, 2015. The company said that this strategic move “is another milestone for the plant engineering and construction specialist of the ThyssenKrupp Group in its efforts to further promote the integration and regionalisation of its plant technology business worldwide. It pursues ThyssenKrupp’s overriding goal of integrating its businesses more closely to create sustainable value as a diversified industrial group.” As of today, ThyssenKrupp Industrial Solutions (France) employs around 300 employees at two locations in Aix-en-Provence and Sarreguemines.

Samir Abi Ramia, CEO of ThyssenKrupp Industrial Solutions (France): “On the basis of decades of experience in EMEA markets, excellent engineering skills and proven technologies, we can now offer tailor-made solutions for the cement, mining and raw materials industries in general from a single source. Joining our forces in France while at the same time benefiting from the global network of one of the world’s leading engineering and construction specialists will enable us serve our customers’ needs even better.”

By combining the French operations, ThyssenKrupp Industrial Solutions is taking the next step to becoming a leading provider in the areas of plant engineering, procurement and construction for clients in the region across the cement, minerals, bulk materials handling and processing, and mining industries. The turnkey contract experience of the former Polysius will be a major asset for ThyssenKrupp Industrial Solutions (France) which will be extended to the management of important mining and quarry projects, while the experience of the former KH Mineral contributes expertise in the management of short-term projects and in reinforcing the single machine business.

Under the roof of ThyssenKrupp Industrial Solutions, plant technology operations worldwide are managed by the two business units Process Technologies and Resource Technologies. Process Technologies is focused on engineering, procurement and construction for chemical, refinery and other industrial plants, while Resource Technologies offers a comprehensive product portfolio and a wide sales and service network to customers in the mining, cement, mineral processing and materials handling industries.

Trans-Pacific Partnership deal done: Six things you need to know about the TPP

Members of the Australian business community have this morning cautiously welcomed the conclusion of negotiations for the Trans-Pacific Partnership (TPP) after more than five years of talks.

Hailed by Trade and Investment Minister Andrew Robb as “the biggest global trade deal in twenty years”, the TPP is an agreement that takes in the major economies of the Asia Pacific region.

While the exact wording of the TPP is yet to be released to the public, small business representatives this morning said moves toward greater trade opportunities for Australian businesses should be welcomed.

“Any agreement has winners and losers, but this reflects what’s going on,” says Peter Strong, executive director of the Council of Small Business of Australia.

“The world is globalised and we have to embrace that and it’s what the government is doing.”

However, Strong told SmartCompany the signing of the historic trade deal also highlights competition concerns within the Australian economy.

“It also highlights that we need to look internally at what is holding business back,” he says.

“The duopoly [in the grocery sector] is holding business back, there’s no doubt.

“In the TPP there’s two countries that don’t have an effects test. Nearly all of them do, if we’re going to compete fairly let’s be fair and put an effects test in.”

Alex Malley, chief executive of CPA Australia, told SmartCompany the TPP puts Australian businesses in prime position to “secure first mover advantage in a massive new global trade bloc”.

“When you combine the TPP with our existing trade treaties and the pending deal with China, export-oriented Australian businesses now have a global footprint of improved market access,” Malley says.

“Whether you’re an apple exporter from Tasmania or a tech company in Sydney, the TPP is an opportunity to create jobs.”

Malley says, subject to the TPP being ratified, “the world is now a different place for Australian businesses”.

“It’s up to them to take the steps necessary to take advantage of these market access deals for their products and services,” he says.

“The beginning and end of any trade deal is jobs. Navigating the complexities of the multi-nation TPP negotiations to provide opportunities for job creation is a significant achievement.”

The Export Council of Australia and the National Farmers’ Federation (NFF) have also welcomed the conclusion of the TPP talks this morning, with the NFF describing the event as a “huge milestone”.

“The agreement is a generally positive outcome for Australian farmers, which will reduce trade barriers and create new export opportunities for our high-quality food and fibre,” the federation said.

Here are six things you need to know about the TPP:

1. The deal includes 12 countries

Australia is one of 12 countries that form the TPP. These include the United States, New Zealand, Japan, Canada, Chile, Malaysia, Mexico, Peru, Singapore, Vietnam and Brunei.

2. The TPP covers 40% of the global GDP and a third of Australia’s exports

Combined, the TPP countries account for approximately 40% of global gross domestic product and 24% of global trade in services.

According to Minister Robb, one third of Australia’s total goods and services exports, or $109 billion of trade, went to TPP countries in 2014.

Close to 35% of Australia’s services exports went to TPP countries, worth a total of $20 billion.

3. It has taken years to get to this point

The conclusion of the TPP negotiations in Atlanta this week comes after five years of talks. The first round of negotiations for the trade deal took place in March 2010 in Melbourne.

The TPP also builds on an earlier trade agreement between Brunei, New Zealand, Chile and Singapore called the Trans-Pacific Strategic Economic Partnership Agreement, which came into effect in 2006.

4. Sugar, dairy among the winners but pharmaceuticals has been a sticking point

Australian sugar and diary producers are tipped to be among the winners under the TPP, with Robb saying today Australian sugar exports in the US will effectively double under the deal. Tariffs for particular types of sugar exports in Canada, Peru and Malaysia will be eliminated or liberalised and levies for high polarity sugar into Japan will also be reduced.

Australian cheese makers will see tariffs into Japan eliminated on $100 million of existing trade and be given preferential access for another $100 million of trade. Cheese producers will also gain preferential access into Mexico and Canada and increased access and tariff reductions for some forms of cheese in the US.

However, one of the more contentious aspects of the TPP concerns patent protections for pharmaceuticals.

Fairfax reports the negotiations were extended through Sunday evening as Australia and the US continued to grapple over a US proposal to keep data for advanced medicines made from living organisms, protected for 12 years. Australia had sought a protection period of five years. The parties have agreed to a protection period of between five and eight years.

5. Service providers will benefit too

Agricultural exporters and manufacturers are not the only potential winners from the TPP; Robb said Australian service providers in sectors including finance, education, health and hospitality and tourism will also benefit from the deal.

In particular, Robb said Australian SMEs that provide professional services are set to win with restrictions in Malaysia “that have long been of concern to Australian SMEs” to be removed.

“Malaysia has locked in recent reforms to the legal, architectural, engineering and surveying sectors,” Robb said.

6. There are concerns about the secrecy of the agreement and negotiations

Despite the slated benefits of the TPP, the deal has not been without controversy, especially when it comes to the transparency of the negotiations.

Consumer group CHOICE said this morning it has collected more than 7400 signatures from Australians who called for the text of the TPP to released prior to the conclusion of the negotiations.

“At about midnight last night, trade ministers confirmed that the TPP negotiations were finished, however the text of the agreement still won’t be publicly available for a number of weeks,” said CHOICE campaigns manager Erin Turner.

“It’s absurd that our Trade Minister has committed Australia to a deal the Australian public has never seen.”

CHOICE is calling for the Productivity Commission to conduct a full cost-benefit analysis of the deal.

AUSTECH 2015 – The draw will be the latest & emerging technologies

First and foremost, manufacturing professionals attend trade shows to see new technology. New technology is what they will get at this year’s AUSTECH, Australia’s premier advanced precision manufacturing and machine tool exhibition.
Co-located with National Manufacturing Week (NMW), the show will be held at the Melbourne Convention and Exhibition Centre from 26 to 29 May.
AUSTECH is the largest gathering of metalworking technologies in Australia. What better opportunity to experience new and different ways to improve your manufacturing business by investigating, in a single venue, what the rest of the world is working on? Manufacturing is always looking for ways and tools to help it make things better, faster and at lower costs.
Along those lines, here are a few of the many new products and technologies on show next week:
Waterjet machining:
Omax Corporation and Headland Machinery Pty. Ltd., the company’s exclusive distribution partner for Australia, will showcase the versatility and high-speed cutting precision capabilities of the Maxiem 1530 JetMachining Centre. The all-new 1530 represents the company’s next generation line of Maxiem machines.
Building on the cost-effective, yet high-performance technology of its predecessors, the newly redesigned 1530 offers enhanced durability, improved performance, and faster production times for an overall increase in productivity and profitability. At AUSTECH, the company is pairing the 1530 with a reliable 40-hp direct-drive pump to demonstrate how easy it is to cut virtually any material quickly and efficiently.
3D printing/additive manufacturing:
BQ will be showcasing Ciclop, the first 3D scanner with 100% free software and hardware. It has been designed and developed with the community in mind, so that they can use it, innovate with it, make their own changes and share them. Ciclop is a rotating triangulation-based 3D laser scanner (it uses laser light to capture the geometry and texture of the object rotating on a turntable) and it is multi-platform. To scan, Ciclop uses Horus, a free software entirely developed by BQ. With this scanner, BQ is expanding its DIY ecosystem, which comprised Prusa i3 Hephestos until now.
Evok3D will be showcasing additive manufacturing in application together with Nissan Motorsport (Nismo). On its stand the company will have race driving simulators, a display V8 race engine, competition steering wheel etc. All showcasing 3D printed parts. Most excitingly any professional 3D printers purchased before June 30 will include a V8 Supercar Hot Lap in the Nissan Altima V8 Supercars!
Objective3D will be part of the Stratasys Pavillion – D05 and at the show we will be featuring the world’s most versatile multi-material 3D printer – The Objet 500 Connex 3 by Stratasys.
The Objet 500 Connex 3 brings new production-floor efficiencies to fruition with in-house tooling, custom jigs, assembly fixtures and gauges. With triple-jetting technology, hundreds of Digital Materials, and two spacious build-tray sizes, Connex3 is designers / engineers product development and production powerhouse.
Users of this 3D Printer will enjoy unmatched versatility with a range of material properties from rubber to rigid, transparent to opaque, neutral to vibrantly colored and standard to biocompatible. For jobs that require a range of mechanical, optical or thermal properties, only Connex3 lets you combine up to three base resins in pre-set configurations to produce up to 82 materials in a single build.
5-axis machining & CNC technology:
Okuma will showcase three levels of new technology, including 5-axis machining. New advanced technology machine models of 5-axis milling with turning, amazing advances in the user-interface of Okuma’s own OSP controller technology and packaged, kit-style automation solutions.
Shera Bonnet & Associates will have a new web-based solution for monitoring the efficiency of CNC machines real time on show. The company makes use of touch screens and tablets or smart phones to allow users to view up to the minute status of their CNC machinery from anywhere they have an internet connection. Managers walking around exhibition could be monitoring what their shop is doing while away from their plant. Automatic messaging when a machines status changes and on line efficiency reports will allow management to assess how well their shop is going 24/7.
Accessories & more:
Dimac will have several new products from a diverse range of OEMs at its stand this year, including Freddy Products: a vacuum coolant cleaner for coolant and swarf. The new Freddy Superminor+ is designed to remove coolant, swarf and oil from machine tool sumps, separate the particulates and return filtered coolant for re-use. Alternatively liquids and particles can be easily disposed of. The new Freddy Superminor+ has been re-engineered for even greater cost effective coolant management. Other products on show include a workholding system for difficult to hold parts using light a activated bond from Blue Photon and live centres from Royal Products.
Industrial Minerals will be showcasing the Geoblaster wet abrasive machine & Novatek Dustless tools, innovative equipment designed to control dust and air pollution in the industrial sector.
Trademaster specialised pipe bevelling machines will be on demonstration this year at Austech. The company will be showcasing a range of portable mandrel machines for bevelling steel pipe from diameters 32mm – 372mm.
Anca Motion shows its LinX Linear motors this year. The cylindrical linear motors offer a conitnuous force rage of 407N to 815N as well as high-speed acceleration. The cylindrical design provides improved performance at a lower cost when compared to conventional flat linear and rotary motors. Zero net attractive forces improve efficiency with no down force, extending machine life. The LinX linear motor range is available in a variety of different sizes to allow for application-specific solutions.
Ausfork has recently launched its new online training and record keeping service called ACT-Online at the Cemat Exhibition in Sydney. Ausfork has focussed on all of the Materials Handling Equipment (MHE) such as Forklifts, Pallet Jacks, electric Pallet Jacks, Walkie Stackers and developed online theory modules for the purpose of equipment specific Inductions, Refresher Training and Verification of Competence (VOC). It is all backed by a Learning Management System that keeps all of the records ‘in the cloud’ www.ausforkcloud.com.au.
Of course, there will be many, many more products and exciting technology on show, so make sure you don’t miss this event! Organiser AMTIL looks forward to welcoming you to our show from 26 to 29 May 2015.

澳洲联储宣布降息!澳元暴跌、澳股疯涨

澳洲联储(RBA)周二公布利率政策决议,一如市场预期降息25个基点至2.25%,旨在刺激低迷的国内经济,称预计降息将支持需求,同时继续对澳元施加下行压力。同时,决议声明显示,委员会认为未来进一步降息也是合适的政策举措,进一步巩固了市场对后续降息的预期。决议公布后,澳元兑美元急挫100余点,刷新2009年6月以来新低0.7650。澳洲股市S&P/ASX 200指数扩大涨幅至1%,触及2008年5月以来最高。

澳洲联储决议声明表示,鉴于大宗商品下滑,澳元汇率仍高于基本面价值,预计降息将支持需求。降息将有助于促进经济增长,且通胀率符合目标。

澳洲联储决议还称,仍预计增长速度将低于趋势水平,降息的目的是为了提振经济增长,可能需要汇率进一步走低来帮助平衡经济增长,未来1-2年通胀将符合目标区间,预计失业率需再走高一些才能见到峰值。在一段时间内产出增长仍低于趋势水准。
澳洲联储自2013年8月就一直将关键利率保持在2.50%的低位不变,这次降息可谓充满戏剧性;早前有调查显示澳洲联储本次降息25个基点的概率高达六成,但因上月末的第四季度核心通胀超预期而让市场放松对澳洲联储降息的戒备,“意外”降息也导致澳元兑美元急速下挫;本轮降息也意味着迫于油价走低带来的通缩压力,澳洲联储在新的一年将转变此前“利率维稳”的态度。

澳元兑美元在决议公布后暴跌:031306535nit在金钱抱昨日发布的前瞻报告中曾向投资者提及,澳洲联储降息同时暗示未来可能进一步降息是对于澳元最为利空的结果,而澳元兑美元此次在决议后出现暴跌,也完全在预料之中,目前来看,澳元兑美元下行之路最为关键的支撑点将是0.75关口。此前在去年末,澳洲联储曾表示希望乐见澳元兑美元跌至该水平。

澳洲联储RBA预计再次进入降息周期

鉴于对澳大利亚经济疲软状况的担忧,澳洲联储很可能在今天的政策会议上选择降息。

最新官方数据显示,澳洲年度失业率有所下降,然而本季度失业率平均值比上个月的平均值有所升高,说明失业率仍在继续攀升。在过去的一年中,澳洲平均失业率由5.9%逐步上升至6%、6.1%,最终达6.2%。

澳洲联储理事会公布的经济数据显示,澳大利亚6个月内经济年度增速由3.6%下滑至1.6%。,新的预测数据将在周五重新公布。

由于经济增长所需财政预算下跌回长期水平,消费者信心指数和企业信心指数均未出现提振。

受到价格折扣的影响以及工资缓慢增长和攀升的失业率的压力,零售销售数据保持稳定但并未出现大幅增长。

油价暴跌以来,整体通胀水平已经下跌至1.7%,进一步偏离澳洲联储在上一年第二季度所设定的2—3%的通胀目标。更重要的是,不同于去年年底给出的油价下跌将放缓的预期,澳洲联储可能会预计油价将继续下跌,而这一下跌将影响其他商品价格,给通胀带来更大下行压力。

澳洲联储的重心并未放在2014年第四季度超高的基本通胀率上,而更加关注与 “非贸易品”(不进行国际交易的商品)相关的通胀率。由于工资增长缓慢和消费者需求降低,这一指标较去年同期大幅下滑。然而尽管澳元严重贬值,与“贸易品”(可进行国际交易的商品)相关的通胀率也已经出现负值。

尽管受到降息是否能有刺激经济增长的质疑,澳洲联储仍希望降低隔夜现金利率。然而大家担心这一降息决定可能会对地产投资市场造成不利影响,其刺激企业和消费者借贷以增加消费的目的可能无法实现。

另一降息阻力来自于澳洲联储在12月政策会议后发布的声明,声明中提到“最谨慎的做法应该是维持利率一段时间内的稳定”。

澳洲联储相信自去年12月以来,油价暴跌、经济增速放缓和低通胀率已经改变了市场情况。他们相信如果降息势在必行的话,那么现在就是最好的时间。他们同时担心如果违背了降息预期,近期内贬值的澳元将会重新反弹。

本周二,包括新任的财政部长John Fraser在内的澳洲联储理事会的9个成员将最终决定是否降息。目前市场预期降息势在必行。如果考虑到近期经济增长而没有降息的话,降息决定将可能出现在3月。

Bradken buyout falls through

A proposed acquisition of Bradken has collapsed as mining markets remain volatile.
Late last year a private equity consortium, consisting of Bain Capital and Pacific Equity Partners, made approaches for a takeover of the construction and engineering company.
The move, worth around $872 million, drove Bradken stock up 36.45 per cent in a single day.
However the deal has now collapsed.
According to Bradken, following due diligence of the consortium and the development of a proposal “the recent volatility in global commodity and financing markets has impacted the consortium’s ability to obtain financing on terms acceptable to the consortium”.
“As a result, the consortium has now informed the Board that it is not in a position to make a binding proposal at this time.
“Consequently, Bradken and the consortium have ceased all discussions in relation to the proposal.”
Following this announcement Bradken has now focused on “a number of fast-payback Capex initiatives that are designed to increase EBITDA and overall margins on existing volumes”.
This includes the recent acquisition of a foundry in India and cost reduction activities.
Bradken also has a gloomy outlook ahead, stating that while it “remains well positioned to navigate through this volatility, there are no visible signs at this stage of a turnaround in the mining cycle”.
The manufacturer will announce its results in early February.

New screen plants launched

Terex Minerals Processing has developed new feeder and screen plants, expanding its CR Series of portable plant range.

The new machines, the Terex Cedarapids CRS620S Portable Screen plant and Terex Cedarapids CRS6203FV Portable Feeder/Screen plant, are the next generation of Terex processing plants, according to the company.

Terex stated that the new CRS620S screen increases production and handles applications not possible with traditional horizontal screens because it combines high g-force oval stroke motion with adjustable variable slope operation.

This plant can handle larger deck loads and larger screen openings.

Hydraulics raising modules can quickly change the screen slope in 2.5 degree increments up to a maximum of 7.5 degrees to best fit the screening application.

Screen openings up to 152 mm are possible while ‘slant spring’ screen suspension provides stability at all slopes, and includes low-maintenance dampers and also eliminates transport braces.

The plant uses large capacity conveyors to handle the high production capabilities of the new LJ-TSV6203 screen, while an optional fines reject system is able to remove excess fines to help achieve in-spec product without additional conveyors.

The 1219 mm wide fines conveyor, which has an elevated discharge, and the two 762 mm wide reversible cross conveyors, which extend up to 1067 mm beyond the main frame, easily feed off-plant conveyors.

The screen plant has magnetic screen deck liners for cross beams and diagonal braces.

Roll-away blending chutes and extended walkways allow easy access to screen cloth.

A low-maintenance flex shaft screen drive eliminates drive belt influence on the screen motion, belt whip, belt slippage, and spring loaded belt tensioners.

There are no drive adjustments necessary when the screen slope is altered. In addition, the new flex shaft drive folds for travel, without shaft disassembly, to minimise plant transport width.

Terex added that the plant interfaces with cone in-out style plants.

Its other machine, the CRS6203FV, has been designed to “handle applications not possible with traditional horizontal screens because it combines the efficient, high g-force oval stroke motion with variable slope operation”.

In a similar fashion to its other machine the CRS6203FV uses a LJ-TSV6203 variable slope screen that is able to handle larger deck loads and has bigger screen openings that increase throughput and production.

A bottom deck deflector plates shift material towards the feed end of the screen, boosting screen efficiency.

Hydraulic raising modules are able to lift the screen up to 10 degrees in 2.5 degree increments as needed, while its patent pending screens stabilisation system also includes motion dampers.

Under-frame mounted triple-axle spring suspension with spring-applied brakes provides increased stability.

It has a large surge hopper with a remote controlled tipping grid and a variable belt feeder that allows loader feed from either side of the machine for more flexibility in production.

The feed hopper measures 4877mm by 2438 mm and comes with rubber side curtains.

The portable feeder screener has been designed with maintenance in mind, and features conveniently located grease banks, cartridge style cross belt flashing, and Martin style conveyor belt wipers.

Its service platforms and guard rails run around three sides of the screen, and are accessed by a telescoping ladder.

“Plant interfaces with cone in-out style plants and can be configured with or without belt feeder and grid providing high versatility,” Terex said.

However Terex are not the only company to introduce new screens.

CDE Global has released a number of new screens in its ProGrade range, which features new screen design systems.

According to CDE the new screen design system results in a stronger but lighter screen which requires less power.

This is due to a re-design of the side walls on the screens.

The new bolted screens also include zero welds and are galvanised as standard, all of which serves to maximise plant life, maximise plant availability and minimise time required for maintenance.

An additional feature of the new ProGrade screens is the patent pending CDE U-Span cross members.

The new cross member design is modular across the ProGrade range and also include zero welds.

As well as offering enhanced geometric consistency the new design facilitates increased space between screen decks, allowing for quick and easy access to replace screen media.

CDE Global product development manager Kevin Vallelly added that “the first stage of the new ProGrade product launch sees the introduction of our new patented technology on a number of screens and dewatering screens. The developments will also be incorporated on the new EvoWash 100 range of sand washing plants and across the M2500, M3500 and M4500 portable washing plants and the R2500 primary screening unit.”

The new screen design system is now available on the ProGrade P2-75 (two deck 5 meter by 1.5 metre screen), P3-75 (three deck 5 meter by 1.5 metre screen) and P2-108 (two deck 6 metre by 1.8 metre screen).

Over the course of the next few months the new design will also be offered on the ProGrade P3-108 (three deck 6 metre by 1.8 metre screen).

Australian dollar goes under US 80 cents for first time since 2009

Australian-dollar-goes-under-US-80-cents-for-first-time-since-2009-659065-lThe Australian dollar went under US 80 cents this morning for the first time in five-and-a-half years.
AAP reports that the dollar fell as low as US 79.96 cents this morning and was trading at US 80.05 cents at 8:30 am, following the announcement of a 60 billion Euro per month stimulus package announced by the European Central Bank.
The dollar had weakened on Wednesday from US 82.13 to 80.81, reported Fairfax, following a surprise cut in the Canadian interest rate by the Bank of Canada and a drop in that country’s currency.
“The BoC decision has relevant parallels to Australia – namely, a commodity-centric economy with growth slightly below-trend and an inflation pulse that is providing space for some additional easing,” Daniel Been, senior currency strategist at ANZ Bank, told Fairfax at the time.
There were predictions the Australian dollar would head under US 80 cents following the announcement of quantitative easing by the European Central Bank to deal with the region’s weak economy.
European growth is under one per cent and unemployment is at 11.5 per cent.
The bond buying program was worth 60 billion Euro a month until the end of September next year, the ECB’s president Mario Draghi said. This was slightly larger than the 50 billion Euro a month predicted ahead of Draghi’s announcement, according to AAP.

Read more at http://www.ferret.com.au/articles/news/australian-dollar-goes-under-us-80-cents-for-first-time-since-2009-n2520321#557UJMIVihz13RRP.99

ESCO Corporation Adds Foundries In Australia, New Zealand

ESCO Corporation, an Portland, OR-based manufacturer of castings for industrial products used in the resources, infrastructure, power generation, and transportation markets, has purchased two foundries that will pace its expansion into Australia and New Zealand.

Austcast Pty Ltd
, located in Brisbane, Australia, and its Dunedin, New Zealand-based subsidiary Newlcast, were acquired in efforts to “strengthen ESCO’s product offerings and expansion efforts” by providing local foundry capacity, according to a release.

Austcast manufactures high-integrity steel and specialized alloy irons for the mining, rail, and general engineering industries. As part of ESCO, Austcast will continue to manufacture rail products and will “adjust operations in 2011 to include ESCO’s industry-leading ground engaging tools and other mining and construction wear parts,” according to the announcement marking the acquisition.

The foundry in Brisbane includes molding, melting and heat treating capabilities, as well as a pattern shop and non-destructive testing. Newlcast supplies ferrous castings, a variety of steels, and alloy irons. Both sites employ nearly 100 workers.

The addition of these foundries is another step in ESCO’s efforts to permeate the markets just this year, the company explains. In July, ESCO acquired Swift Group, a designer and producer of mining, infrastructure, and agricultural products with locations in Brisbane, Mackay, and Kingaroy. In October, ESCO selected Mine & Quarry Service Company Pty as its distributor in the region.

“Our acquisition of Austcast is a key development in ESCO’s plan to establish a national sales, supply chain, and manufacturing network in Australia, and will further our efforts to deliver quality, value, and speed to our customers on a global scale,” stated Cal Collins, president of ESCO engineered products.